How to fetch your fetch HOMEMADE KEGERATOR chest freezer with a collar to mount the taps thru. One motive it’s a long way advisable to fetch a collar around the prime of the freezer for the taps is so we contain no longer favor to drill holes thru the freezer and difficulty about drilling thru any freezer lines, any other motive is in case you ever desire to transform it support to a chest freezer, you might maybe no longer fetch any extra holes to accommodate.
List of Supplies:
5/16″ CO2 line meeting
Sankey coupler of most fashioned vogue
3/16″ Beer line meeting
4″ Shank meeting
Faucet with lever
Drip tray (no longer foremost)
7/8″ Gap Saw
1/4″ Drill Bit
To acquire started:
1} You’ll desire to make employ of a 2″x4″ or a 2″x6″ pine or your preference of picket to fetch the collar.
You would fetch even handed making an are attempting to support the picket alongside with miter clamps and employ two 2.5 dash screws on every joint to support every little thing together, you might maybe simply additionally desire so that you just may maybe add some picket glue loyal to support accomplish decided your physique is trusty.
2} After you fetch gotten let the glue dry and your physique is ready, build it on prime of the freezer to accomplish decided it’s sq.. Once this turned into as soon as performed, you might maybe desire so that you just may maybe add a thick bead of silicone your entire map around the freezer and build the collar on prime of it and build something with moderately bit of weight on prime of it to guarantee a tight seal and preferrred insulation, also you desire to employ the silicone to seal up your entire seams around your collar and also the save the collar meets the freezer. Which you might simply additionally desire to build some silicone around the underside of the freezer, loyal to support forestall any rust that would possibly maybe simply desire to commence forming.
3} Once the silicone had dried in a single day, you might maybe save of dwelling the lid on the collar and screw in the hinges using 1″ picket screws. Subsequent you might maybe drill your holes against the prime of the two×6. Then employ a 7/8″ drill bit to accomplish the holes thru the collar that supply a truly cosy fit in opposition to the shanks.
4} Subsequent drill a 5/16 dash gap in the support of the collar. This gap is for the gasoline line. You would like favor to accomplish decided it’s a snug fit.
5} Trudge your hose clamp over the skinny discontinuance of your beer hose. Push the skinny discontinuance of your beer line over the nipple discontinuance of the shank (possibly strive soaking the hose in some sizzling water, heard it would possibly maybe simply support). This would well rob a while but accomplish decided to slip it on your entire map.
6} Trudge the clamp over the discontinuance of the hose and shank, squeeze firmly and tighten.
7} Insert a washer into the nut discontinuance of your beer line, then crew the nut discontinuance down onto the coupler and tighten with a wrench.
8} Trudge a hose clamp over the discontinuance of the air hose that is internal the freezer, then build that discontinuance of the air line over the nipple discontinuance of the coupler. Trudge the clamp over the hose and coupler, then squeeze firmly to tighten.
9} Trudge a hose clamp over the diversified discontinuance of the air hose, then build that discontinuance of the air hose over the nipple discontinuance of the CO2 regulator, then slip the clamp over the regulator and hose. Squeeze firmly to tighten.
10} Join the regulator to the CO2 tank and tighten firmly with a wrench. DO NOT OVER TIGHTEN.
11) Insert the coupler into the keg, with take care of in the up save of dwelling. Rotate the coupler clockwise until it stops, pull out the take care of and push down until it clicks.
12} Flip the regulator valve to the On save of dwelling.
13} Flip the tank valve to the On save of dwelling (counter clockwise). Alter the regulator to be taught 10 to 12 psi by turning the take care of clockwise. This can differ by the develop of beer and the dimensions of the beer hose. The gauge on the left of the regulator indicates the overall tank rigidity. This can drop because the tank empties.
14} Subsequent install the temperature controller. Cling the thermometer internal the freezer and contain no longer let it touch something else. Save decided the thermometer is positioned someplace against the prime of the freezer, if positioned at the underside you might maybe no longer acquire a loyal finding out. Temperature at the underside is chillier than the prime. You may slip it below the collar which may maybe mute fetch a tight seal. Subsequent hurry the freezer into the controller, and the controller into the electrical outlet. Alter the controller to fetch a temperature around 34 levels. The controller will bustle the freezer until it hits 34 levels. This would well simply flip the freezer support on as soon as the temperature reaches 38 levels.
Now you are accomplished with your Homemade Kegerator, beer must always be kept around 38 levels.
Subscribe to the newsletter news
We hate SPAM and promise to keep your email address safe